Webinar Optimal solvent management

Solvent management is an important feature of any CO₂ absorption technology.

ECCSEL ERIC, the European CCUS Research Infrastructure

You will learn what ECCSEL ERIC is, how it operates and how you can get access to the facilities which are part of ECCSEL ERIC.

Webinar Ensemble simulations with MRST with examples from CO₂ foam simulation

Recent work investigating the effect of reservoir heterogeneity on the efficiency of CO₂ mobility control in saline aquifers, has made use of the newly introduced ensemble module in the MATLAB Reservoir Simulation Toolbox (MRST).

Webinar CO₂ storage modelling with the Matlab Reservoir Simulation Toolbox (MRST)

Modelling geological storage of carbon dioxide is characterized by scarce data, large spans in spatial and temporal scales, and delicate balances between different physical flow mechanisms.

The NCCS Research Centre - where have we been and where do we go?

NCCS has completed a successful midterm review in 2021 and is entering an exciting new phase.

ACCSESS – a Horizon 2020 CCS project

The ACCSESS project is a 4-year Horizon 2020 Innovation Action that started in May 2021. The vision is to develop replicable CCUS pathways towards a climate neutral Europe in 2050.

Webinar: Cement bond push-out tests with exposure to CO₂

The experimental method known as the push-out test was used to assess the shear bond strength for well cement, in contact with rock formations.

Webinar: Effects of plastic deformation on poroelastic pore pressure coefficients

This presentation contains extracts from our work on the relationship between the undrained pore pressure response to stress changes and plastification of a transversely isotropic (TI) medium, such as shales.

NCCS Webinar - Thermopack – open source thermodynamics library

Thermodynamics is a core topic used to describe the nature around us, or process equipment in the industry.

NCCS Webinar - Solvent degradation testing in post-combustion CO₂ capture – The importance of fundamental knowledge and test strategies.

NCCS Webinar - Deployment of a transport infrastructure for CCS from Norwegian industry

NCCS Webinar - Reducing risks using geological models for CO₂ storage

NCCS Webinar - Safe and cost-efficient CO₂ storage: Emerging monitoring technologies

NCCS Webinar - CO₂ liquefaction for ship transport – How low pressure?

NCCS Webinar - The path to zero-carbon, large-scale power generation: state-of-the-art, recent progress and remaining challenges in hydrogen-firing of gas turbines

NCCS Webinar - More accurate fluid properties enable reductions of CCS costs and risks

NCCS Webinar - Safe CO₂ transport – Design of an offshore CO₂-transportation pipeline

NCCS Webinar - Aligning European CCUS funding and R&I strategies

NCCS Webinar - Membrane-Assisted CO₂ capture through liquefaction for clean H₂ production

NCCS Webinar - Safe CO₂ transport – A 90 meters deep experimental facility in the university campus

NCCS Webinar - Potential and challenges for CO₂ capture integration in process industries

NCCS Webinar - International Synergism with NCCS’ goals: Examples from the UK

NCCS Webinar - How to use recent developments of the Matlab Reservoir Simulation Toolbox for fast prototyping of complex fluid models

NCCS Webinar - The Norwegian CCS Research Centre: Overcoming barriers to CCS deployment through industry-driven Research and Innovation

NCCS Webinar - Instability in salt precipitation due to dry CO₂ injection

NCCS Webinar - Legal Research in NCCS

During this webinar, two questions related to CCS legislation will be addressed, based on current legal research undertaken in NCCS (Task 1) at the University of Oslo:

NCCS Webinar - Incentivising low carbon products through public procurement. CCS under the EU Emissions Trading Scheme.

Climate criteria in public procurement - tools for incentivising low carbon products.

NCCS Webinar - Updates on PMR development from experiments and modelling (Task 3)

The webinar will give an update on results from PMR experiments and modelling activities.

NCCS Webinar - CO₂ mobility control – Modelling of CO₂ foam core flooding experiments" (Task 11)

NCCS Webinar: CO₂ liquefaction close to the triple point pressure – experimental results (Task 4)

NCCS Webinar - Cost-optimal conditions for transport of CO₂ via ship (Task 1)

NCCS Webinar - A machine learning based monitoring framework for CO₂ storage (Task 12)

NCCS Webinar - Design of a CO₂ metering test loop (Task 8)

NCCS Webinar - CCS potential of the Triassic alluvial succession in the eastern Horda Platform (Task 9)

NCCS Webinar: Carbon-free firing of state-of-the-art gas turbines - Task 5

Carbon-free firing of state-of-the-art gas turbines: Technology readiness, potential impact and research challenges.

Webinar: Solvent management strategies: How to overcome operational challenges? (Task 2)

An effective solvent management can enable a CO₂ capture plant to run in a controlled manner, with limited solvent degradation, and hence low emissions.

NCCS Webinar - Calibration of Pipeline Steel Model for Computational Running Ductile Fracture Assessment

The webinar will present results from a conference paper published earlier this year and presented at the ISOPE conference.

NCCS Webinar - Addressing across-fault and top seal potential for CCS in Viking Group sandstones of the Horda Platform

NCCS Webinar - H₂ production by Protonic Membrane Reformer technology: Recent results and AWP2020

The webinar will present recent results from PMR testing and electrical characterization of PMR membranes, as well as updates on modelling activities and plans for 2020.

NCCS Webinar - Evaluation of MEA data from different lab set-ups

The webinar will present results from this year investigating 2-ethanolamine (MEA) data from different lab set-ups

NCCS Webinar - Cement bonding tensile strength investigation

The webinar will present results from this year's laboratory campaign investigating the strength of the cement-to-shale interface.

NCCS Webinar - Progress in thermodynamics for CCS

The webinar consists of two parts:"Accurate phase equilibrium measurements for CCS using an analytical method" and "An Extended Fundamental Equation of State for Thermodynamic Properties of Mixtures Relevant for CCS-Applications".

NCCS Webinar - Oxygen solubility in selected amine solutions

The webinar will present an overview on the topic of oxygen solubility, particularly in solutions of amines used for CO₂ capture.

NCCS Webinar - Quantitative monitoring at Smeaheia and Sleipner

The webinar will present recent advances in geophysical monitoring for large-scale offshore CO₂ storage. Bastien Dupuy will show how quantitative monitoring can be carried out combining different data and several inversion steps. Application to real data at Sleipner will give insights in CO₂ saturation and spatial distribution. Baseline models and the implications for monitoring plans at Smeaheia will be described in the second part of the seminar.

NCCS Webinar - CO₂ storage with mobility control

The webinar will present recent work performed on mobility control of CO₂ for aquifer storage application. Unfavourable mobility contrast between injected CO₂ and formation brine at reservoir conditions can result in low utilisation of aquifer storage which could be improved if efficient mobility control methods could be implemented for the injected CO₂.

NCCS Webinars - Lessons Learned Solvent Stability

The webinar will concern chemical stability/degradation of solvents candidates for CO₂ capture. Solrun Johanne Vevelstad will present lessons learned from studies which included impact of the molecular structure and formation pathways. Hypothesis based on literature data and in-house competence for amines will be suggested.

NCCS Webinars - 3D fault integrity screening for Smeaheia CO₂ injection site

The webinar will present results from task 9, Structural derisking.

NCCS Webinars - Innovation in FMEs

The webinar will concern innovation and innovation management, and will have two parts. In the first part, Sigmund Størset will be present main findings from his Master of Technology Management thesis, titled "Managing open innovation process in large university-industry research programmes", which used FMEs as a case study. The second part will concern activities planned or underway in the NCCS Innovation and Technology Transfer task.