To main content

Simulation of dew points in raw biogas using PR and SRK equations of state :

Abstract

Biogas contains mainly methane, but raw biogas can
contain large amounts of CO2 and is normally saturated
with water. Condensation, especially during
compression, may lead to operational problems. The
aim of this work is to calculate the dew point
(condensation limit) under different conditions with
different models in the simulation programs Aspen
HYSYS and Aspen Plus. Binary coefficients for water
and CO2 in these models will be fitted to experimental
data from the literature. Traditionally, gas mixtures of
methane, CO2 and water are calculated with standard
models like Peng-Robinson (PR) and Soave-RedlichKwong (SRK). For dry biogas (mixtures with only
methane and CO2) all the models give similar results.
For a biogas mixture with 60 mol-% methane and 40
mol-% CO2 with 0.1 mol-% added water, the models
using binary coefficients fitted for binary mixtures
(especially for CO2 and water), gave reasonable results
up to about 70 bar, with deviations in the calculated
dew point up to 8 K. The binary coefficient for water and CO2 was fitted to experimental data from the
literature for a mixture with a CH4 to CO2 molar ratio
of 30/70, 50/50 and 70/30. The fitted kij values for the
PR model were 0.65, 0.21 and 0.17, respectively.
For the SRK model, the kij values were slightly
higher. At pressures below 70 bar and temperatures
below 40 °C, the uncertainty for calculated dewpoints in mixtures with 30 to 100 % CH4 was reduced
to less than 4 K
Read publication

Category

Academic article

Language

English

Author(s)

  • Terje Bråthen
  • Lars Erik Øi
  • Jon Hovland

Affiliation

  • University of South-Eastern Norway
  • SINTEF Industry / Process Technology

Year

2019

Published in

Linköping Electronic Conference Proceedings

ISSN

1650-3686

Publisher

Linköping University Electronic Press

Volume

170

Page(s)

112 - 117

View this publication at Cristin