Abstract
A numerical model has been developed and applied to serve the offshore industry to predict and report environmental risks associated with offshore discharges. The development has taken place over a time period of about 20 years, and is fully financed by the offshore operators. The model is fully four-dimensional (time and 3D space variations included) and covers the water column and sediment compartments.
The model was first developed and applied to produced water discharges. Later, drilling discharges and coastal discharges (terminal releases) were included. At present, the "DREAM Charter" project focuses on revisions of the risk approach according to recent literature, validation of the numerical model by comparing with laboratory and field data, and also addresses the uncertainties in the predictions. Present participants are BP, ConocoPhillips, Det Norske, ENI, Statoil and Total.
The model tool has been applied to predict and report environmental risks associated with discharges to sea (mostly produced water and drilling discharges). A parameter, EIF (Environmental Impact Factor), has been developed and used as a measure for size of potential environmental impact. This parameter has also been used as a basis for selection of chemicals used, and to give priority to the most cost efficient measures to reduce environmental impact.
The model tool makes it possible to select the best option to reduce environmental impact in a cost efficient manner, weighting reduction of the size of the EIF against costs. The introduction of new OSPAR regulations (OSPAR, 2012) allows for an alternative approach (Whole Effluent Approach) which is discussed as well.
The model was first developed and applied to produced water discharges. Later, drilling discharges and coastal discharges (terminal releases) were included. At present, the "DREAM Charter" project focuses on revisions of the risk approach according to recent literature, validation of the numerical model by comparing with laboratory and field data, and also addresses the uncertainties in the predictions. Present participants are BP, ConocoPhillips, Det Norske, ENI, Statoil and Total.
The model tool has been applied to predict and report environmental risks associated with discharges to sea (mostly produced water and drilling discharges). A parameter, EIF (Environmental Impact Factor), has been developed and used as a measure for size of potential environmental impact. This parameter has also been used as a basis for selection of chemicals used, and to give priority to the most cost efficient measures to reduce environmental impact.
The model tool makes it possible to select the best option to reduce environmental impact in a cost efficient manner, weighting reduction of the size of the EIF against costs. The introduction of new OSPAR regulations (OSPAR, 2012) allows for an alternative approach (Whole Effluent Approach) which is discussed as well.