COIN Project Reports

Principles of making cement with reduced CO₂ emission – State of the art. SINTEF-report SBF BK A07019
Justnes, H. (2007)
Making cements with less clinker content – State of the art. SINTEF-report SBF BK A07020
Justnes, H. (2007)
Effect of mineralizers in cement production – State of the art. SINTEF-report SBF BK A07021
Engelsen, C.J. (2007)
Separate grindings versus intergrinding – State of the art. SINTEF-report SBF BK A07022
De Weerdt, K. (2007)
Ternary blended cements with fly ash and limestone. Part I: Activation of fly ash – State of the art. SINTEF-report SBF BK A07023
De Weerdt, K. (2007)
Ternary blended cements with fly ash and limestone. Part II: Limestone powder – State of the art. SINTEF-report SBF BK A07024
De Weerdt, K. (2007)
Accelerating admixtures for concrete – State of the art SINTEF-report SBF BK A07025
Myrdal, R. (2007)
Reduced cracking by modifying matrix with admixtures or additives – State of the art. SINTEF-report SBF BK A07026
Justnes, H. (2007)
Reduced cracking by internal curing of concrete – State of the art. SINTEF-report SBF BK A7028
Justnes, H. (2007)
Alternative pozzolans as supplementary cementitious materials in concrete – Sate of the art. SINTEF-report SBF BK A07032
Østnor, T. (2007)
Retarding admixtures for concrete – State of the art. SINTEF-report SBF BK A07035
Myrdal, R. (2007)
Low water permeability through hybrophobicity. COIN-report 1
Justnes, H. (2008)
Quality improvers in cement making – State of the art. COIN-report 2
Engelsen, C.J. (2008)
Low porosity through optimized particle packing of concrete matrix. COIN-report 13
Justnes, H. (2009)
Pozzolana from minerals – State of the art. COIN-report 16
Justnes, H. (2009)
Fly ash in concrete. A literature study of the advantages and disadvantages. COIN-report 18
Bremseth, S.K. (2010)
Geopolymers - state of the art. COIN-report 37
De Weerdt, K. (2011)
Fly ash - Limestone synergy in triple cements. COIN-report 46
De Weerdt, K. (2013)
Durability of mortar with calcined marl as pozzolan. COIN-report 49
Østnor, T. (2013)
Durability of mortar with calcined marl as pozzolan 2 year results. COIN-report 50
Østnor, T. (2014)
Rheology of blended cements with superplasticizers. COIN-report 58
Ng, S. (2015)
Alternative binders based on lime and calcined clay. COIN-report 68
Østnor, T. (2015)
Microstructure of clinker - fly ash interactions. COIN-report 69
De Weerdt, K. (2015)
Hardening accelerators for fly ash blended cement. COIN-report 71
Justnes, H. (2015)

Thermal mass concepts – State of the art. SINTEF-report SBF BK A07030
Haase, M. (2007)
Comfortable buildings and constructions – State of the art. SINTEF-report SBF BK A07031
Hveem, S. (2007)
Night flushing and ceiling acoustic solutions: The effect on summer thermal comfort and energy demand. COIN-report 10
Sartori, I. (2009)
Design for improvement of acoustic properties. COIN-report 19
Hveem, S. (2009)
Good details for concrete constructions in passive houses. COIN-report 26
Klinski, M. (2010)
Post-occupancy evaluation of a recent energy efficient office building. COIN-report 30
Grini, C. (2011)
LCA on case study – concrete. COIN-report 36
Kalbakk, T.E. (2011)

Quality of concrete surfaces. SINTEF-report SBF BK A07013
Vikan, H. (2007)
Concrete workability and fibre content. SINTEF-report SBF BK A07029
Vikan, H. (2007)
Pumping of concrete and mortar - State of the art. COIN-report 5.
Jacobsen, S. (2009)
Means of improving concrete construction productivity - State of the art. COIN-report 8
Vikan, H. (2008)
Influence of rheology on the pumpability of mortar. COIN-report 21
Vikan, H. (2010)
Stability of SCC – chemical stabilisers versus filler. COIN-report 25
Vikan, H. (2010)
Rheological properties of stabilized SCC – using fillers, admixtures or a combination. COIN-report 38
De Weerdt, K. (2011)
The effect of stabilization with either filler or chemical stabilizer on the surface quality of concrete elements. COIN-report 39
De Weerdt, K. (2012)
Characterisation of concrete surfaces in Askimporten tunnel. COIN-report 45
Kaspersen, K. (2012)
Stability of SCC - robustness for changes in water content and sand grading. COIN-report 47
Martius-Hammer, T.A. (2013)
Brukermanual for BetongGUI – analyse/karakterisering av porer på betongoverflater. COIN-report 51
Østnor, T. (2014)
Practical methods to assess segregation risk of SCC on site. COIN-report 59
Martius-Hammer, T.A. (2015)
Static yield stress measurements on SCC, mortar and matrix. COIN-report 65 (NTNU-report, Dept of Structural Engineering ,ISBN 82-7482-102-5.)
Wirthova, M. (2013)

Influence of fibers on cracking due to plastic and drying shrinkage. SINTEF-report BK A07027
Sandbakk, S. (2007)
Fibre reinforced superlight concrete: Testing of materials and full scale beams. COIN-report 15
Kanstad, T. (2009)
Steel fibres in load – carrying concrete structures. Guideline survey and practical examples. COIN-report 17
Klausen, A.B.E. (2009)
International round robin testing of circular FRC slabs: Reporting and evaluation of test. COIN-report 23
Sandbakk, S. (2010)
Material properties influencing concrete residual bending strength – Experimental study. COIN-report 28
Vikan, H. (2011)
Forslag til retningslinjer for dimensjonering, utførelse og kontroll av fiberarmerte betongkonstruksjoner, COIN-report 29
Kanstad, T. (2009)
Ultra High Performance Fibre Reinforced Concrete (UHPFRC) - State of the art. COIN-report 44
Eide, M.B. (2012)
Round Robin Test program on Energy Absorption Capacity of Round Panels according to Norwegian Concrete Associations Publication no 7:2011. COIN-report 48
Bjøntegaard, Ø. (2013)
Structural FRC - Design approach and experimental results. COIN-report 66
Nedrelid, H. (2015)

Production and Utilisation of Manufactured Sand. COIN-report 12
Wigum, B.J. (2009)
Classification and Particle Properties of Fine Aggregates (< 63µm) - Applied as concrete aggregate. COIN-report 32
Wigum, B.J. (2011)
Hokksund Quarry – Review of the aggregate production. COIN-report 33
Wigum, B.J. (2011)
Manufactured sand in concrete – effect of particle shape on workability. COIN-report 34
Pedersen, B. (2011)
Rheology of matrix and SCC with different mineral fillers and admixtures. COIN-report 41
Cepuritis, R. (2012)
A preliminary study on using manufactured sand from Jelsa Quarry for the production of plastic concrete mixes. COIN-report 42
Cepuritis, R. (2012)
Physical properties of Norwegian mineral fillers investigated by different methods. COIN-report 43
Cepuritis, R. (2012)
Review report on dry and wet classification of filler materials for concrete. COIN-report 52
Aasly, K.A. (2014)
Characterisation of fillers < 0.125 mm used in Case study Velde. COIN-report 60
Ng, S. (2015)
Characterisation of fillers with plasticizers: Zeta Potential measurements. COIN-report 61
Ng, S. (2015)
Flyplassdekke med maskinsand - Værnes APRON Vest. COIN-report 62
Smeplass, S. (2015)
Erfaringsrapport - Velde Pukk. COIN-report 63
Smeplass, S. (2015)

Autogenous deformation and relative humidity:Concrete with Aalborg Portland cement and fly ash. COIN-report 24
Kjellmark, G.(2010)
Basis for and practical approaches to stress calculations and crack risk estimation in hardening concrete structures. COIN-report 31
Bjøntegaard, Ø. (2011)
Property development and cracking tendency in hardening concrete: Effect of cement type and fly ash content. COIN-report 40
Bjøntegaard, Ø. (2012)
Temperature Development in On-Site Curing Boxes. COIN-report 54
Klausen, A.B.E. (2014)
Mechanical properties and calculation of model parameters for concrete with Norcem cement and variable fly ash content. COIN-report 55
Kjellmark, G., Klausen, A.B.E. (2015)
Mechanical properties and calculation of model parameters for concrete with Aalborg cement and variable fly ash content. COIN-report 56
Kjellmark, G., Klausen, A.B.E. (2015)
Beregning av rissrisiko CrackTeSt COIN. COIN-report 57
Skjølsvik, O., Haram, E. (2015)

Critical Chloride Content – State of the art. SINTEF-report SBF BK A07037
Angst, U. (2007)
Effect of surface treatment on chloride ingress and carbonation in concrete. COIN-report 3
Plesser, T.S.W. (2008)
Stainless steel reinforcement in concrete structures - State of the art. COIN-report 4
Markeset, G. (2008)
Modelling of reinforcement corrosion in concrete - State of the art. COIN-report 7
Markeset, G. (2008)
Kloriddiffusjon i betong:Vurdering av aldringseffekten ved felteksponering. COIN-report 11
Skjølsvold, O. (2009)
Shore Approach. 26 years performance of high quality concrete in a marine environment. COIN-report 14
Maage, M. (2009)
Corrosion Inhibitors – State of the art. COIN-report 22
Myrdal, R. (2010)
RILEM TC 219-ACS-P: Literature survey on performance testing. COIN-report 27
Lindgård, J. (2011)
Workshop on Moisture in Concrete, Trondheim, Norway 6–7 February 2012

Ice abrasion data on concrete structures - an overview-State-of-the-art. SINTEF-report SBF BK A07036
Møen, E. (2007)
Diffusion tight concrete – Preliminary study. COIN-report 9
Jensen, T.M. (2008)
Confinement effect of fibres on the behaviour of lightweight aggregate concrete beams. COIN-report 67
Øverli, J.A. (2015)
Experimental study on flexural ductility in over-reinforced lightweight aggregate concrete beams. COIN-report 70
Jensen, T.M. (2013)