2009

•  J. M. Hjelmervik
  The State of the Art in GPU Computing
  NVIDIA and SINTEF HPC GPU Computing Mini-Workshop, October 23, Oslo Norway
• J. M. Hjelmervik
  Flow Visualization
  Meteorologisk institutt, Oslo, sep 21

2008

• J. Seland,
  Ray-casting Algebraic Surfaces using the Frustum Form
  Eurographics 2008, April 17. 2008, Crete Greece
• T. R. Hagen,
  Impact of Heterogeneous Computers on Computational Methods,
  SAGA Workshop, Castro Urdiales, Spain, 2008
• T. R. Hagen,
  Impact of Heterogeneous Computers on Computational Methods,
  21st Nordic Seminar on Computational Mechanics, Trondheim, 2008
• J.M. Hjelmervik,
  Simplification of FEM-models on multi-core processors and the Cell BE,
  Seventh International Conference on Mathematical Methods for Curves and Surfaces, Tønsberg, Norway, 2008-06-30
• T. R. Hagen,
  Introduction to the Cell BE,
  Winter School in Parallel Computing, Geilo, 2008
• J. Seland,
  CUDA Programming
  Geilo Winter School, January 24. 2008, Geilo, Norway
• T. R. Hagen,
  Introduction to stream processing,
  Winter School in Parallel Computing, Geilo, 2008
• T. R. Hagen,
  Heterogeneous Architectures,
  Workshop in High-Performance Computing applied in Computational Mechanics and Science, Oslo, 2008
• T. R. Hagen and J. Seland,
  Birds of a feather - parallel processing,
  Winter School in Parallel Computing, Geilo, 2008
• C. Dyken,
  Semi-uniform tessellations,
  Kongsberg SIM Hackaton, Hadeland, Norway, 2008-05-06.
• A. R. Brodtkorb,
  A Comparison of Three Commodity-Level Parallel Architectures: Multi-core CPU, the Cell BE and the GPU,
  VERDIKT program conference, Bergen, Norway, 2008-10-29
• A. R. Brodtkorb,
  Boosting Performance using Heterogeneous Computing, Guest lecture,
  Programming Asymmetric Multi-Core Processors, Department of Informatics, University of Oslo, Norway, 2008-10-24
• A. R. Brodtkorb,
  A Comparison of Three Commodity-Level Parallel Architectures: Multi-core CPU, the Cell BE and the GPU,
  SIMULA Research Laboratory, Oslo, Norway, 2008-08-19
• A. R. Brodtkorb,
  A Comparison of Three Commodity-Level Parallel Architectures: Multi-core CPU, the Cell BE and the GPU,
  Seventh International Conference on Mathematical Methods for Curves and Surfaces, Tønsberg, Norway, 2008-06-30
• A. R. Brodtkorb,
  Some Properties of Selected Parallel Architectures,
  Workshop in High-Performance Computing (HPC) applied in Computational Mechanics and Sciences, DNV, Oslo, Norway, 2008-05-19
• A. R. Brodtkorb,
  Some Properties of Selected Parallel Architectures,
  PARA'08 9th International Workshop on State-of-the-Art in Scientific and Parallel Computing], Trondheim, Norway, 2008-05-15
• A. R. Brodtkorb,
  A MATLAB Interface to the GPU,
  MuCoCoS'08 2008 International Workshop on Multi-Core Computing Systems, Barcelona, Spain, 2008-03-07
• C. Dyken,
  HistoPyramid-based stream compaction and expansion,
  Winter School on Parallel Computing, Geilo, Norway, 2008-01-24.
• A. R. Brodtkorb,
  Programming the Cell BE,
  Second National Winter School in eScience, Geilo, Norway, 2008-01-25
• A. R. Brodtkorb,
  A MATLAB Interface to the GPU,
  Second National Winter School in eScience, Geilo, Norway, 2008-01-24

2007

• A. R. Brodtkorb,
  A Heterogeneous Processing Platform,
  VERDIKT conference, Trondheim, Oslo, 2007-10-29
• C. Dyken,
  HistoPyramid stream compaction and expansion,
  Advanced Computer Graphics and Vision seminar series, Technischen Universität Graz, Austria, 2007-10-23.
• J. Seland
  GPU Programming and Computing
  Workshop - High-Performance and Parallel Computing, October 24, 2007, Simula Research Lab, Norway
• T. R. Hagen,
  Using Graphics Hardware for High Performance Computing,
  Guest lecture in Computer Architecture course, NTNU Trondheim, 2007
• J. Seland
  Real time Ray-Casting of Algebraic Surfaces
  Workshop on Computational Methods for Algebraic Spline Surfaces, September 10 - 14, 2007, Strobl, Austria
• A. R. Brodtkorb,
  Heterogeneous Platforms and Numerical Linear Algebra,
  Workshop on Computational Methods for Algebraic Spline Surfaces, Strobl, Austria, 2007-09-13
• J.M. Hjelmervik,
  GPU-Accelerated Shape Simplification for Mechanical-Based Applications,
   IEEE International Conference on Shape Modeling and Applications 2007 (SMI '07), Lyon, France, jun 13 - jun 15

2006

• T.Dokken. 
  The Graphics Processing Unit (GPU) as a high performance computational resource for simulation and geometry processing.
  Industry Challenges in Geometric Modeling and CAD – 2006, March 9 & 10, 2006, Darmstadt University of Technology.
• J.M. Hjelmervik,
  Heterogeneous architectures,
  GPGPU workshop in Oslo 12/12-06, Oslo, Norway,
• Johan Seland,
  Programmable Graphics Hardware,
  GPU as a computationalresource , December 12th 2006 in Oslo
• Johan Seland,
  Implicit Surface Visualization using Graphics Hardware 
  Geometrical partial differentail equations: numerics and applications, Bergen 6-7 December 2006
• Johan Seland,
  Implicit Surface Visualization using Graphics Hardware,
  The CMA Seminar, 28. September 2006
• C. Dyken,
  Efficient gather operations using histogram pyramids,
  GPU as a computational resource workshop, Oslo, Norway, 2006.
• J. Seland
  Programmable Graphics Hardware
  Guest lecture in INF3320, 22. November 2006
• T. R. Hagen,
  GPU Architecture and GPU Programming,
  GPGPU Workshop at NTNU, Trondheim, June 8th, 2006
• T. R. Hagen,
  Solving the Euler Equations on Graphics Processing Units,
  GPGPU Workshop at ICCS, Reading, May 29th, 2006

• A. R. Brodtkorb,
  Numerical Linear Algebra in Matlab using the GPU,
  GPU as a computational resource workshop, Oslo, Norway, 2006-12-12

2005

• T. Dokken.
  The GPU as a high performance computational resource,
  2nd CENS-CMA Seminar, CMA, University of Oslo, May 24-25, 2005
• T. R. Hagen,
  Graphics Cards as a High-Level Computational Resource,
  guest lecture in Simulation and Visualisation Course, University of Oslo, 2005
• T. Dokken, T.R. Hagen and J. M. Hjelmervik.
  The GPU as a high performance computational resource,
  Spring Conference on Computer Graphics 2005, Budmerice Castle, Bratislava, Slovakia, May 12-14 2005
• T. R. Hagen,
  Graphics Cards as a High-Level Computational Resource,
  guest lecture in VR, Graphics and Animation Course, Narvik University College, 2005
• T. Dokken, Hagen, Trond R.
  Short Course: Graphics Hardware as a High-end Computational Resource
  SIAM Conference on Geometric Design and Computing; 30.10.2005 - 03.11.2005
• T. Dokken, Hagen, Trond R.
  The GPU as a Computation Resource in Surface Intersections
  SIAM Conference on Geometric Design and Computing; 30.10.2005 - 03.11.2005
• T. Dokken,
  The GPGPU-project, status and results. Why use the GPU?
  GPU workshop; 12.12.2005, Oslo, Norway
• T. R. Hagen,  
  GPU-architecture, 
  GPU workshop; 12.12.2005, Oslo, Norway
• Johan Seland,
  GPU-programming, 
  GPU workshop; 12.12.2005, Oslo, Norway
• T. R. Hagen,
  The GPU as a High-Performance Computational Resource,
  Workshop on Industry Challenges in Geometric Modelling and CAD, March 10 and 11, 2005

 2004

• T. Dokken, and K.-A. Lie
  Workshop,
  GPU as a computational resource, November 10-11, 2004, Oslo, Norway
• J.M. Hjelmervik,
  Using GPUs for B-spline evaluation,
  Workshop on GPU as a computational resource November 10-11, 2004, Centre of Mathematics for Applications, Oslo.
• T. R. Hagen,
  Solving differential equations on the GPU,
  Workshop on GPU as a computational resource November 10-11, 2004, Centre of Mathematics for Applications, Oslo.
• T. R. Hagen,
  Infrastructure for GPU Programming,
  Workshop on GPU as a computational resource November 10-11, 2004, Centre of Mathematics for Applications, Oslo.
• T. R. Hagen,
  GPU Programming,
  Workshop on GPU as a computational resource November 10-11, 2004, Centre of Mathematics for Applications, Oslo.
• T.R Hagen and J.M. Hjelmervik.
  Using GPUs for numerical simulation and spline evaluation,
  Sixth International Conference on Mathematical Methods for Curves and Surfaces. Tromsø, Norway, July 1 - July 6 2004.
• T. Dokken.
  Graphics hardware as a high-end computational resource,
  Industry Challenges in Geometric Modeling in CAD – 2004, March 17 and 18, 2004, Darmstadt University of Technology